How To Clean Puffco
How To Clean Puffco. Then you can remove the little plastic slit on the bottom of the downstem as well. You may need to let the bubbler soak overnight to loosen up thicker concentrate buildup.
I basically decided i was going to risk breaking mine because it was impossible to clean. You can remove the downstem from the top plastic piece itself with just some light tugging. Fill the bubbler a little less than half way with rubbing alcohol, cover the opening, and shake it to loosen up any gunk inside.
You Can Remove The Downstem From The Top Plastic Piece Itself With Just Some Light Tugging.
Once it’s nice and clean, rinse it out with fresh water and set it out to dry. Take your small container and soak the chamber and carb cap in rubbing alcohol for a few hours. Clean the airpath between the chamber and the glass.
We Recommend Cleaning Your Plus With The Included Instructions Every Few Uses To Prevent Any Build Up In The Vapor Path.
Use a tightly wound cotton swab to remove remaining byproduct in the chamber and on the dart. Soak atomizer every time you charge. Once soaked, remove and rinse thoroughly with clean water to remove any excess alcohol.
We Found That This Method Works Best If The Chamber Has Been Recently Used And Is Still A Little Warm.
Always let them cool down first to avoid damage. Do not soak any gunmetal parts of the puffco plus in rubbing alcohol. Gently clean gold threads using cotton swabs soaked in 90%+ iso.
99% Is $28 For A Gallon On Ebay.
I still have loads of coarse salt from when i had a bong (tossed it after it had a crack). Forget the puffco cleaning recommendations. How to clean the puffco peak pro:
Place The Bubbler Inside A Ziplock Bag And Submerge It In Iso.
If the iso is cool and the chamber is hot, you could potentially cause thermal shock and crack the bowl. Leafbuyer tv shows you how to clean a puffco peak!marijuana 101 videos: How to clean a puffco?
Post a Comment for "How To Clean Puffco"